Airfix WW2 Russian Infantry (Copies)

Just a quick post with these figures I've painted in between of the other projects. These twelve figures are Hong Kong copies and I've painted them in two versions. Summer and winter uniform. They look glossy because of the varnish I used. They are for sale.

Thanks for watching!

Painted in 2024

- 20 mm:

    - Figures: 0

    - Horses: 0

    - Cannons: 0

    - Wagons: 0

- 28 mm

    - Figures: 0

- 54 mm

    - Figures: 28

Airfix WW2 US Infantry

First post of the year, so I wish everyone a very good and healthy year. And lots of modelling fun of course! 

These Airfix figures are produced in 2009-2016 (http://www.airfix132.de/hornby_2009.html) and are made of hard plastic and not in soft plastic like the older ones. After a good wash I painted them with acrylic paints. Seven poses, but there seems to be another officer pose. I made a base for the figure with the bazooka with a plastic sheet.

I hope you like them and so I'm started in this year. Here is the box art and pictures of the unpainted figures. 

Thanks for watching!

Painted in 2024

- 20 mm:

    - Figures: 0

    - Horses: 0

    - Cannons: 0

    - Wagons: 0

- 28 mm

    - Figures: 0

- 54 mm

    - Figures: 7

Caesar H036 WWII Chinese Army

I had some figures of this set lying around, but not enough, and with the help of a friend at Benno's Figures Forum, who sended me some extra figures so I could make three bases with these figures. This set of figures doesn't have so much details, so they painted very easely. Not all poses ofthem are presented because I didn't have them. Nevertheless this is a nice mix. 

I hope you like them.

 

Thanks for watching and stay safe!

Model on!

Dragon LVT-(A)4 WIP 002

Today I present step 3 and 4 from this work in progress. It has been a while but I really have been busy with this project. Not as busy as I would like but I can't change that anymore.

As you can see I'm still working in the base color of this tank and I haven't paiinted one of the details yet, except for the wheels. Later on this project I will use some bottles of AK, which I bought at FIGZ Arnhem this year, after following a workshop. And on the latest CRISIS, I bouoght some more.

Step three

This is a part of the upper hull with lots of tiny pieces to at. I lost some on the floor, because they were to tiny for me. I work a bit different since then. Now I add a little piece of blue tape to the part before I cut it from the sprue. Works fine for me, and when it falls of the table, I'm able to find it back!

Pictures are a bit blurry, but that's because I used my old camera. Next time I will use my other one again.

Step four

Second part of the upper hull.

Next picture is what is called a dry fitting. Just to see how it looks so far. Glueing is for later.

Paints used so far:

- Revell 46 Nato olive

- Revell 09 Anthracite

Here are also some pictures of the figures that will join this tank. One has his foot broken, but he insisted to stay in the show. Inside the tank you will not see that.

See you all in the next episode.

Welcome to my blog!!!!!

Dragon LVT-(A)4 WIP 001

Cause of a comment I gave in this topic on Benno's Figures Forum I recieved a very nice model of this tank from Frank Krüger, better known as Hellboy on the forum. Thank you Frank! The only condition he gave me is that I really would make the model and show it on the forum. You can find all the work of Frank, on this location http://www.hellboy-miniatures.de/ .

Now as you can see in the history of this blog, is that I don't make many kits like this. But I like the challenge, and as I never made a Dragon kit, I would like to find out how good or bad this kits are. So I started working on it last year in November. And now I show you how far I am at this very moment.

I will try to show it step by step like show on the building instructions included by the model. Today it will be step one and two. The next steps will follow soon I hope, because I would like to finish it before the FIGZ meeting in Arnhem, Sunday June 3th 2018. There will be a weathering workshop and this model looks like it could need some of that!

Let's start with the box art. It shows the model in a Pacific theatre. The figures shown on the box are not included, but Frank was so kind to include two figures, some stowage and an aerial to complete the model. Thanks again Frank!

Step one

These are the two side pieces with all the wheels on. Not much to glue here but a lot to paint. To be complete, I don't have an airbrush, so I paint all with brushes.

Paints used so far:

- Revell 46 Nato olive

- Revell 09 Anthracite

Step two

Adding the rest of the bottom of this tank and some more small parts. Again a lot of brushwork, three layers were needed to cover the surface. But I'm pleased with the result so far.

Looks like I will have to do some retouching on some parts. But no problem, we will do that with a smile!

See you all in the next episode.

Welcome to my blog!!!!!

Arnhem Groupe Build Project Finished!

Not been very busy on blogger this week but I really wanted to get this project to an end. When I realised this week that there were only three weeks left for the event I pushed up the speed a little bit. Now I can say that it is finished and ready to be posted to the one who is making the whole diorama. I also wanted to finish something else but that is for later on this week.

Global picture off the finished vignette!

What did I do this week? First I did a little set-up to see how everything fits on the base. Then I drilled some holes in the base for placing the poles from the plates in with some wood glue. Next I added the mix of woodfiller with sand an brown paint over the whole base and I placed the checkpoint cabine. It had to dry for at least 24 hours so it would become very hard. Here is a picture off the result so far.



Next I painted the base completely with a dark brown from Revell. Then I drybrushed with GW Graveyard Earth, Revell Beige and GW Kommando Khaki. Then I placed some bushed made from Woodlands Scenic folliage, flowers from Greenline and Miniatuur and some grass from Games Workshop.

The tank was something tricky to place on the base. I had just enough place to get it on it. From the back off the tank to the front of the cannon is just 10 cm, the lenght of the base! At that moment I decide not to glue the turret so it can be moved a little bit to left or the right. Last step was adding the figures on the tank. They are all placed with wood glue so that it will invisible when it is dry.

Now it is time to reveal what is on the plates I placed. Maybe some of you remind that I wanted this tank to pass the border between Belgium (Lommel) and the Netherlands (Valkenswaard). Here you can see how I symbolised the border.

Flag of Belgium!

Flag of the Netherlands!

And because this is made for a very special event in Arnhem I added also a sign to let them know what direction they have to take.

Yes, that's the direction!

That's the story off this little piece of work. Here are some more pictures from other angles so that you get a good view off how it looks like. I hope you all like the final result.

So if you want to see this work and many others that members of Benno's Figures Forum have made for this project come to Arnhem on the 5th June. Here I give once more the information of this event.

FIGZ

Wargaming & miniatures event in the Netherlands

Sunday 5 June 2016, Arnhem (NL)

http://www.figz.nl/





In the next days I will be active on blogger again. And later on this week I will post some figures I painted last week, and I have to blame someone for that. But as said that is for later on this week!

Welcome to my blog!!!!!